
GreenLife Biovitor DN 100
At a glance:
100% chemical-free filtration using natural biological processes
Low maintenance with no wear parts and maintenance intervals of up to ten years
DN 100 connection for rainwater systems with a connected area of up to 170 m²
Delivery available throughout Ghana
Bulk and commercial orders are welcome
For delivery enquiries, bulk orders, or additional information, please contact us on +233 24 215 9852.
The GreenLife Biovitor is a low-maintenance biological filter for rainwater harvesting. It cleans rainwater without chemical additives and helps improve water quality before it enters a tank or cistern. With no wear parts, it is designed for reliable, long-term use with minimal maintenance.
How it Works
Rainwater enters the Biovitor through the downpipe. In the first chamber, marble gravel pre-treats and mineralises the water. In the second chamber, oxygen and natural microorganisms supported by bio-active bodies break down remaining organic matter. Non-organic particles settle at the bottom, while the clarified water flows gently into the rainwater tank.
Maintenance
The Biovitor has no wear parts and requires no chemical additives. Depending on the installation and operating conditions, maintenance is generally required every five to ten years. Gutter grilles and other pre-filter systems must be cleaned regularly.
FEATURES:
Two-chamber design for efficient biological purification
Marble gravel helps mineralise the water and can raise its pH value slightly
Bio-active bodies support the breakdown of remaining organic matter
Also functions as an inlet calmer, reducing turbulence in the tank
Suitable for new installations and retrofitting to almost all rainwater systems
Suitable for cisterns and systems with subsequent infiltration
Helps achieve a high rainwater yield without filter-related water losses
Material
Polyethylene
Weight
9,5 kg
Connection
DN 100 (dₐ 110)
Diameter
485 mm
Height
1100mm
Connectable area (at 300 l/s*ha)
170 m²
